
120x40x2200 ITA/FEM/ISO Forks
Load center : 500mm
Weight of single fork: 92kg
Mounting class :2A
The weight of a single 120x40x2200 ITA/FEM/ISO fork is 92 kg. The cross-section is 120 mm wide, 40 mm thick, and the total length is 2.2 meters. There are eight sealed chambers drilled along the length of the fork body of this pair of forks. The chambers are filled with phase change energy storage media, which undergoes a solid-liquid phase change at 58 degrees Celsius. When the fork pushes the high-temperature workpiece that has just come out of the heat treatment furnace, the phase change material absorbs a large amount of heat and stably controls the fork surface temperature below 60 degrees to prevent the fork from high-temperature creep or pallet burns. On the contrary, when operating in a cold storage at minus 30 degrees Celsius, the material releases latent heat of solidification to delay frost on the fork surface and reduce ice adhesion. The fork tip working surface is plasma-sprayed with a zirconium oxide insulation layer to effectively block contact heat transfer. The hook positioning surface is milled with a two-way wedge-shaped guide groove, which automatically aligns and eliminates lateral gaps when pushing into the hanging plate.
After locking, the stud bolts are used to prevent loosening.
The product meets the three major standards of ITA, FEM and ISO at the same time. The inside of the lower hook is clad with copper-nickel alloy and does not cause electrochemical corrosion when in contact with the hanging plate. The fork surface presses shallow arc-shaped transverse tooth patterns, and the tooth patterns guide demolding when pushing sticky asphalt or resin packaging. Each pair of forks undergoes a thermal cycle test before leaving the factory to record the heat storage and release efficiency of the phase change material. With a single weight of 92 kg and a folding hand winch at the end of the fork, a single person can lift the fork to the height of the hanging plate. This specification mainly serves aluminum alloy wheel hub heat treatment lines, large gear induction quenching stations and polar seafood cold chain transfer sites.






Hot Tags: 120x40x2200 ita/fem/iso forks, China 120x40x2200 ita/fem/iso forks manufacturers, suppliers, factory, Heavy Duty Pallet Forks, Forklift Forks, ITA Class III Forklift Forks, Forklift attachment forks, Forklift Replacement Tines, Pallet Fork blades
You Might Also Like
Send Inquiry











