120x40x2100 ITA/FEM/ISO Forks
video

120x40x2100 ITA/FEM/ISO Forks

Capacity of fork couple: 3000kg
Load center : 500mm
Weight of single fork: 88kg
Mounting class :2A
Send Inquiry
Product Introduction

The weight of a single 120x40x2100 ITA/FEM/ISO fork is 88 kg. The section is 120 mm wide, 40 mm thick, and two meters long. This pair of cargo forks is equipped with three sealed damping cavities inside the fork back. The cavities are filled with a mixed medium of high-density tungsten alloy particles and silicone oil. When the forklift vibrates while driving or pushing goods, the particles rub against each other and convert the vibration energy into heat energy. The vibration acceleration measured at the cab handle is reduced by 55%. The upper surface of the fork tip is embedded with red, yellow and blue composite wear pieces. After the top red piece is worn away, the yellow middle layer is exposed. The wear continues until the blue bottom layer reaches the scrap limit. The remaining life can be judged visually. The hook positioning surface adopts an asymmetrical eccentric arc design. The hook profiles of the left and right forks are mirror images of each other, which physically prevents reverse installation. If you try to install reversely, you will not be able to push the hanging plate in. The product meets the three major standards of ITA, FEM and ISO. The inside of the lower hook is equipped with a rotatable eccentric sleeve.

 

 

The rotating sleeve can compensate for the vertical gap caused by the wear of the hanging plate to ensure that the height of the two fork tips is consistent. The fork surface presses continuous trapezoidal corrugations, and there are dust exhaust holes at the troughs. When pushing bulk cement bags or powder pallets, powder leaks out of the holes to prevent accumulation and lifting of goods. The surface treatment uses high-gloss yellow powder coating, and black rings are sprayed at intervals of 500 mm to form eye-catching warning stripes. Before each pair of forks leaves the factory, the damping coefficient is calibrated for a full length of two meters, and the data is engraved into the metal label of the fork leg. With a single weight of 88 kg, it is equipped with a folding lever jack at the end of the fork. By shaking the handle, the fork can be raised to the height of the hanging plate. After being pushed in horizontally, it is automatically locked using the weight of the fork. This specification is mainly used for maintenance of large-scale vibrating feeders, heavy-duty powder packaging lines, and ultra-long shelf operations in cement prefabricated parts yards.

 

 

 

production 1001

quality 2001

 

packaing 4

packing 4

performance 3

CE 5

 

 

 

 

 

 

 

 

 

Hot Tags: 120x40x2100 ita/fem/iso forks, China 120x40x2100 ita/fem/iso forks manufacturers, suppliers, factory, ITA Class II Forklift Forks, Universal Pallet Forks for Tractor, Forklift Forks, Forklift Fork blades, ITA Forklift Forks, Lift Truck Forks

Send Inquiry

whatsapp

Phone

E-mail

Inquiry