120x35x1000 ITA/FEM/ISO Forks

The weight of a single 120x35x1000 ITA/FEM/ISO fork is 44 kg. The section is 120 mm wide, 35 mm thick, and one meter long. This pair of forks is specially designed for handling large home appliances, solar photovoltaic panels or hollow blow molded parts. The wide flat fork surface greatly reduces the contact pressure and avoids damage to the bottom of thin-walled goods. Each 44-kilogram fork is forged and placed into a cryogenic box as a whole, where it is kept at minus 70 degrees for six hours, which promotes the full transformation of retained austenite and extremely high dimensional stability. The upper surface of the fork tip is pressed with oblique and fine anti-slip patterns, and the pattern is at a 45-degree angle with the axis, so that it will not hook damaged wooden strips when inserted into the pallet. The hook positioning surface is laser textured to form a uniform array of micro-pits, which stores sufficient grease and does not require refilling within six months after installation. The product meets the three major standards of ITA, FEM and ISO. Its locking pin adopts a double-headed reverse thread structure.

 

 

It can lock the gap between the upper and lower hooks at the same time by rotating half a turn, and no helper is required for one-person operation. There is a load zone diagram etched on the fork surface near the root, and the rated weight corresponding to the 400, 500, and 600 mm load centers is marked respectively. The surface is coated with silver gray polysiloxane topcoat, which is UV aging resistant and easy to clean. Before each pair of forks leaves the factory, a torsional stiffness test with a total length of 1,000 mm is performed, and the torsional deformation curve of each pair is recorded. Curves with a coincidence degree of less than 95% will not be matched. With a single weight of 44 kg and the flat handle slots on the fork legs, the fork can be lifted to the height of the hanging plate with one hand. This specification is widely used in air-conditioning outdoor unit production lines, plastic pallet rental stations, and LCD panel packaging workshops.

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: 120x35x1000 ita/fem/iso forks, China 120x35x1000 ita/fem/iso forks manufacturers, suppliers, factory, Forklift Replacement Tines, Forklift Fork blades, Pallet Forks Attachment, Lift Truck Forks, Universal Pallet Forks for Tractor, FEM Forks