120x40x1700 ITA/FEM/ISO Forks
video

120x40x1700 ITA/FEM/ISO Forks

Capacity of fork couple: 3000kg
Load center : 500mm
Weight of single fork: 75kg
Mounting class :2A
Send Inquiry
Product Introduction

The weight of a single 120x40x1700 ITA/FEM/ISO fork is 75 kg. The cross-section is 120 mm wide, 40 mm thick, and the total length is 1.7 meters. This pair of forks is directly rolled from a continuous casting billet. There are no welds or splices from the root to the fork tip. The metal flow lines are continuous and uninterrupted, completely eliminating the heat-affected zone. The fork tip profile adopts a parabolic gradient, changing from a common wedge shape to a quadratic curve transition. The stress concentration coefficient is reduced by 30%, and the fatigue life under the same load is significantly extended. The surface of the hook is chemically plated with nickel-phosphorus alloy, with a thickness of 25 microns and a hardness of 550HV. The coating is even and there is no risk of hydrogen embrittlement. There is no need to apply any grease during installation. There is an eccentric locking bushing on the inside of the lower hook. The rotating bushing can compensate for the vertical gap in the forklift hanging plate due to long-term use, ensuring that the front ends of the left and right forks are at the same height.

The fork surface does not have any embossing or grooves, and is entirely ground to Ra0.4 microns. It is equipped with a colorless transparent ceramic coating and will not leave any scratches when pushing precision-machined rails or large H-beams. Before each pair of forks leaves the factory, the stiffness is matched for a full length of 1.7 meters. The difference in deflection between the left and right two when fully loaded does not exceed 0.3 mm, and an independent load test report is attached. With a single weight of 75 kilograms and a hand winch integrated at the root of the fork, a single person can raise the fork to the height of the hanging plate by shaking the handle, push it in horizontally and lock it. This specification mainly serves railway rail yards, heavy steel structure manufacturing workshops and large water conservancy gate processing plants.

 

 

 

production 1001

quality 2001

 

packaing 4

packing 4

performance 3

CE 5

 

 

 

 

 

 

 

 

Hot Tags: 120x40x1700 ita/fem/iso forks, China 120x40x1700 ita/fem/iso forks manufacturers, suppliers, factory, Forklift carne arms, Forklift attachment forks, ITA Forklift Forks, Clamp on Universal Pallet Forks, Pallet Forks Attachment, Universal Pallet Forks for Tractor

Send Inquiry

whatsapp

Phone

E-mail

Inquiry