Knowledge

Forklift tines serve as the primary load-bearing components of forklifts. In standard operation, workers always use them in pairs to handle cargo transportation tasks. Among all te

Forklifts serve as essential workhorses in material handling and transportation. Their components can be categorized into external attachments and internal parts - with internal co

Most of the forks and forks we see are two teeth or more than two teeth, and the truck forks with one tooth are very uncommon, because the truck forks are strictly forbidden to ope

Stamped parts are a method of forming pieces (stamped parts) in which external forces are applied to plates, strips, tubes and profiles by pressing and dies to plastically deform o

The wind generated by the operation of the stamped fan uses the blades to complete the wind cutting function.

A common problem in the stamping process of stamped parts is the uneven surface.

Daily maintenance is carried out by the stamping parts duty personnel, carefully do the pre-shift work, check the shift handover record, check the operation of the stamping parts,

When bending and processing metal stamping parts, it is not only necessary to pre-jade springback phenomenon, but also to prevent the occurrence of bending cracks.

The accuracy of metal stamping parts is usually divided into precision precision and economic precision. But no matter what kind of accuracy, the accuracy of stamped parts is not v

Gently wipe with a dry soft cloth, do not clean with chemical detergent or acidic liquid, if you find that there are black spots on the surface that are difficult to remove, you ca

The hinge quality is poor, and the cabinet door is easy to close forward and backward after a long time, loose and saggy. Almost all of the cabinet hardware of big brands use cold-

According to the cover position of the door panel, it is divided into a full cover (straight bend, straight arm) generally cover 18 centimeters, half cover (middle bend, curved arm