The wind generated by the operation of the stamped fan uses the blades to complete the wind cutting function. Simply put, our common wind is driven by the operation of the motor, and the friction between the fan blade and the air produces wind. Common electric fans, ventilators and exhaust fans, industrial fans include Chaogao speed turbofans, high-speed centrifugal fans, vortex fans, etc. The function of the stamping part is to use the air generated by the industrial blower to pass through the pipe to the internal organ of the stamping part, forming a compressed air flow, and then passing through a cross-section of the blade.
Stamping is the power of conventional or special stamping equipment, so that the sheet metal is directly deformed by the deformation force in the mold, so as to obtain the production technology of product parts with a certain shape, size and performance. Sheet metal, mold and equipment are the three elements of the stamping process. According to the stamping temperature, it can be divided into hot stamping and cold stamping. The former is suitable for sheet metal processing with high deformation resistance and poor plasticity. The latter is carried out at room temperature, which is a commonly used stamping method for thin plates.
So what are stamped parts mainly used for? Generally speaking, stamping parts are mainly used in industrial production lines for blowing water or cutting water for drying and industrial dust removal.
What are the common stamping parts? At present, according to the material, it is divided into aluminum alloy stamping parts, aluminum stamping parts, stainless steel stamping parts and titanium alloy stamping parts. According to the shape, it is divided into trapezoidal, pyramidal, and teardrop shapes.
Advantages of stamping parts: polypressing, adjusting the width of the air outlet through the polypressure of the internal organs of the stamping parts, which can make the air outlet uniform and adjust the pressure.
After purchasing stamped parts, many people find that the use effect is not particularly ideal. When choosing stamped parts, many people just compare the price and the length of the product. The stamped parts selected in this way are not very effective.
