150x35x1400 Blank Forks
video

150x35x1400 Blank Forks

Capacity of fork couple: 3000kg
Load center : 500mm
Weight of single fork: 77kg
Mounting class :3A
Send Inquiry
Product Introduction

150x35x1400 Blank Forks weigh 77kg each. The cross-section is 150 mm wide, 35 mm thick, and the total length is 1.4 meters. This blank fork is specially designed for the negative buoyancy counterweight of deepwater underwater manifold structures. It is used as a retrievable temporary ballast module to provide additional gravity to overcome the buoyancy during the lowering process of the structure and assist in precise implantation. The weight of each 77 kilogram unit is calibrated piece by piece by the floor scale, and the error does not exceed plus or minus 0.5 kilograms. The end face is sprayed with a stainless steel corrosion-resistant label to mark the actual value.

 

 

The material is ordinary carbon structural steel Q235B, and the surface is coated with a thick epoxy glass flake coating to adapt to long-term seawater immersion and microbial adhesion environments.  There are two quick-release holes with a diameter of 32 mm drilled at both ends of the fork surface, which are matched with the hydraulic shearing tools of underwater robots or divers.  After implantation, the nylon tie can be cut off remotely to separate the fork from the structure and be recovered to the surface of the water through a buoyancy bag for reuse. Two anti-rotation bars are welded along the length of the fork back to prevent the fork from rotating and shifting under the action of deep water currents.

 

 

The fork tips and fork backs are both rounded to R15 to avoid puncturing the seabed anti-fouling cloth during lowering. A raised-dot Braille code that is readable underwater is affixed to the side of each fork for divers to identify by touch in turbid waters. The packaging is made of steel stackable brackets, each with four brackets. The weight of a single bracket is 77 kg. With two M24 lifting rings on the back of the fork, loading and unloading can be completed using an offshore floating crane or a marine crane. This specification mainly serves the installation of underwater production systems in deep-sea oil and gas fields, counterweighting of submarine optical cable structures, and temporary ballast adjustment of sunken ship salvage buoys.

 

 

 

production 1001

quality 2001

 

packaing 4

packing 4

performance 3

CE 5

 

 

 

 

 

 

 

 

 

Hot Tags: 150x35x1400 blank forks, China 150x35x1400 blank forks manufacturers, suppliers, factory, Blank Forklift Forks, Blank Forklift Tines, Blank Forks, Blank Pallet Forks, Blank Tines, Universal Blank Pallet Forks

Send Inquiry

whatsapp

Phone

E-mail

Inquiry