Straight Brace Bracket
Weight Range ： 0.5g–500kg
Dimensional tolerance ： ±0.5mm
Thickness ： 1mm-100mm
Please provide product specifications so that we can offer specific pricing and MOQ.
Straight brace bracket is a key connection in steel structures, specially designed to enhance the rigidity of right-angle joints. It is made of high-strength steel, and the static bearing capacity of a single limb can usually reach more than 25 kN, which can effectively transform the beam-column connection from a hinged state to a reliable semi-rigid connection. In addition, its excellent bending resistance can carry a torque of up to 1.8 kNm, ensuring that the connection points remain stable under complex forces, significantly improving the overall structure's lateral movement resistance and safety.
In addition to excellent immediate mechanical properties, this product pays more attention to long-term reliability and economy. Treated with a hot-dip galvanized coating of over 70 microns, it provides long-term corrosion protection for over 25 years in regular industrial environments. Strict manufacturing tolerance control, such as the hole center distance error is less than 0.5 mm, ensures the accuracy and efficiency of on-site installation. This makes its initial purchase cost higher than that of ordinary connectors, but from a full life cycle perspective, with extremely low maintenance requirements and long service life, it can effectively reduce the overall holding cost of the project.
Drawing Design & Confirm
Get drawings from customers, or design drawings according to customers' detail requests or sample.
The two parties confirm the details of the drawings and product raw materials, surface treatment, etc.
Benefits
Enhance structural rigidity
In steel frames, the weak points are the right-angle connections between beams and columns. Premium brackets are made of high-strength steel. For example, Q355B steel has a yield strength of 355MPa. Its plate thickness is usually 6 mm.
This converts an "articulation" into a "semi-rigid connection". Tests have shown that it can increase the joint's anti-sideway stiffness by more than 40%. This significantly reduces sway under wind loads. Ensure overall stability.
Standardize quality control
In large-scale projects, the quality of connectors affects the overall situation. High-quality brackets provide complete material certification and third-party test reports. The bolt hole positions are precisely processed.
The hole center distance error is controlled within ±0.5 mm. This ensures fast and accurate installation on site. Each connection point can achieve the design mechanical properties. The overall risk caused by part differences is avoided.
Limit local deformation
Some structures allow slight overall deformation, but key connection points must be stable. Premium brackets offer excellent stiffness. It deforms very little under ultimate load.
Finite element analysis shows that when subjected to a load of 20kN, the arm deflection can be controlled within 0.5 mm. This high local stability ensures the alignment accuracy of precision equipment.
Provides stable suspension
Factory pipelines often need to extend laterally from the wall. The right-angle bracket serves as a "cantilever support". Its bending resistance is excellent. For example, it can withstand a bending moment of 15kN·m.
This ensures that when the 2-meter-long horizontal pipeline is fully loaded, the roots will not sag or twist. Effectively prevents pipeline damage or leakage caused by stress concentration.
why choose us
-
► Stable Quality
- Strict manufacturing tolerance control, such as hole center distance error within ±0.5 mm. Together with complete material certification, the interchangeability of each part is ensured. Quick alignment during on-site installation improves overall construction efficiency and reliability.
-
► Many Application Scenarios
- From storage shelves, steel structure platforms, to pipe supports, equipment bases, and even modular building connections. As a basic engineering connection solution, it covers almost all industrial fields that require right-angle reinforcement.
-
► Low Security Risk
- The high safety factor under strict testing minimizes the possibility of connection point failure. This directly ensures personnel safety and avoids property losses and production interruptions caused by structural problems.
Price & Order
Quote and confirm order quantity, specify all the details including trade terms, payment terms, type of package, etc.
Tooling Design & Manufacturing
Design and Make tooling according to the confirmed drawing, do the modification if needed while testing.
Production Process Design
Carry out technical assessment and analysis on product structure,
design production process, and ensure the feasibility of the process.
Sample Approval
Make first samples and inspect them according to the drawing strictly.
Send to the customer for approval after internal approval.
Production & Shipping
Strictly produce the goods as per the drawings and first samples.
Packed well after final inspection and ship to customers.
Hot Tags: straight brace bracket, China straight brace bracket manufacturers, suppliers, factory, Sheet Metal Fabrication Box, Sheet Metal Fabrication Frame, Sheet Metal Welding Bracket, Stainless Steel Bracket Fabrication
You Might Also Like
Send Inquiry