100x35x1000 ITA/FEM Forks

The weight of a single 100x35x1000 ITA/FEM fork is 37 kg. The section width is 100 mm, the thickness is 35 mm, and the length extends to one meter. This wide, flat and elongated design is designed for handling long but lightweight goods, such as furniture panels, joist strips or plastic pipe bundles. Each weighs 37 kilograms and is much lighter than a thick-section fork of the same length. It is particularly suitable for electric forklifts that pursue high energy efficiency and can reduce the forward tilting moment of the mast. The fork is made of medium-carbon steel that is integrally quenched and tempered at low temperature. The hardness of the fork tip is slightly higher than that of the root, forming a gentle transition zone and will not suddenly break at a certain section. The hook has been carburized and has better wear resistance than the fork body.

 

This model strictly follows ITA/FEM standards, and the distance between the upper and lower hooks is compatible with mainstream European siding boards and is also suitable for some Asian stackers. The width of the fork surface reaches 100 mm, which fully fits the bottom longitudinal beam of a large plastic pallet or an iron cage to prevent single-point overload from causing damage to the pallet. The upper surface of the fork tip is pressed with an anti-slip pattern, which is shallow and dense, so that the wrapping film will not be caught when the fork is inserted. The surface is made of water-based dip paint, with complete corner coverage, and is suitable for warehouse platforms that alternate between indoor and outdoor operations. Each pair of cargo forks is ground in pairs, with the height difference between the left and right not exceeding 1 mm, ensuring that long materials are lifted horizontally. The unit weight of 37 kg is still within the safe range for manual replacement, but it is recommended to use simple handrails to assist in positioning.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: 100x35x1000 ita/fem forks, China 100x35x1000 ita/fem forks manufacturers, suppliers, factory, FEM Forks, Forklift Replacement Tines, ITA Class III Forklift Forks, DIN Forks, Forklift Fork blades, Pallet Fork blades