150x35x1100 Blank Forks
video

150x35x1100 Blank Forks

Capacity of fork couple: 3000kg
Load center : 500mm
Weight of single fork: 66kg
Mounting class :3A
Send Inquiry
Product Introduction

150x35x1100 Blank Forks weigh 66kg each. The cross-section is 150 mm wide, 35 mm thick, and one meter long. This blank fork is specially designed for the gravity loading system in the static test of large wind turbine blades. It is used as a suspended mass to apply progressive loads in the direction of blade flapping and oscillation. The weight of each 66 kilogram unit is calibrated piece by piece by a hook scale, with an error of no more than plus or minus 0.2 kilograms. The actual value is marked with a stamp on the end face and a weather-resistant barcode is pasted on it. The material is ordinary carbon structural steel Q355B, and the surface is hot-dip galvanized.

 

 

The coating thickness is 80 microns, which is suitable for long-term wind and sun exposure in the open-air test site. A main lifting hole with a diameter of 36 mm is drilled at both ends of the fork surface, and the hole edge is thickened to 50 mm, which matches the quick shackle on the test gantry. Multiple forks are vertically connected in series through nylon slings, and combined into different load levels of 132, 264, 396 kg, etc. according to the test plan. Two arc-shaped guide grooves are welded along the entire length of the fork back to prevent the series-connected forks from swinging and hitting each other in the wind. The fork tips and fork backs are both rounded to R15 to avoid cutting the sling during lifting.

 

 

A unique number is sprayed on the side of each fork with white reflective paint to facilitate high-altitude identification during drone inspections. The packaging is made of steel vertical brackets, with six brackets per bracket. The weight of a single bracket is 66 kg. With two M24 lifting eye screw holes on the back of the fork, loading and unloading can be completed using an on-site truck crane or forklift. This specification mainly serves wind turbine blade testing centers, composite material structure laboratories and large wind turbine certification test platforms, and is used as a flexibly configurable gravity loading module.

 

 

 

production 1001

quality 2001

 

packaing 4

packing 4

performance 3

CE 5

 

 

 

 

 

 

 

 

Hot Tags: 150x35x1100 blank forks, China 150x35x1100 blank forks manufacturers, suppliers, factory, Blank Forklift Forks, Blank Forklift Tines, Blank Forks, Blank Pallet Forks, Blank Tines, Universal Blank Pallet Forks

Send Inquiry

whatsapp

Phone

E-mail

Inquiry