Clamp Terminal Block

    Clamp terminal blocks are great for connecting wires in a circuit. It's usually wrapped in a strong, yet fireproof, plastic housing that hides the critical metal parts inside. The housing has special holes for you to insert the wires into, and next to it you can see a small screw or an insignificant small button, small square holes. They are there to help you hold the wires firmly in the terminals.

    There are two main ways to connect the wires. One is with a small screw, you need to take a screwdriver to tighten it, the screw will drive the metal piece at the bottom to press the wire firmly. The other is more convenient, it is spring clamped, you just need to press the small button or use a tool to probe the small square hole, the spring clamp inside will open, then you plug the wire in, release your hand, the force of the spring will automatically clamp the wire. Spring-type insertion and removal of wires is particularly fast, saving time and labor.

    The best thing about it is that connecting wires is safe and easy. Compared to directly screwing wires or soldering, it provides a solid connection point to prevent wires from coming loose and shorting out, and it can also be rewired many times. They can be seen in the machine control cabinets in factories, power distribution boxes at home, and even inside many of the appliances you use, quietly assigning power or signals to where they are needed and are a basic part that cannot be separated from those of electricians and engineers.

Sample Approval

    Look no further than its small size, but the production can be very delicate. Inside the metal conducting sheet and clamping parts are precision machine stamping molded to ensure that the shape is accurate, good conductivity, but also to do anti-rust treatment.

 

    The key spring is the need for specialized production to ensure that the spring force is just right. The plastic shell on the outside is made by melting the granular plastic and injecting it into the mold. Finally, the machine will quickly and accurately assemble the metal parts, springs and plastic shells together into a terminal that can work reliably.

 

    The best thing about it is that connecting wires is safe and easy. Compared to directly screwing wires or soldering, it provides a solid connection point to prevent wires from coming loose and shorting out, and it can also be rewired many times.

 

Our advantage

1.Simple operation.

Especially the spring clamping type, press the button or poke a small hole, insert the wire to loosen the clamping, no need to twist the screwdriver, greatly saving wiring time, operation is particularly trouble-free.

2.Solid and secure.

Whether it is screwing screws or spring automatic compression, the wires can be fixed firmly, and will not be easily loosened. Wire contact is good will not be easy to heat, electricity is safer and more secure.

3.Can be reused.

When you need to change the wires or check them, loosen the screws or press the button to take the wires out, and it's just as easy to put them back in. The terminal itself is not easily broken and can be reused many times.

4.Wide range of use.

It can be securely fixed on the rail or board of the control cabinet, connecting several wires together centrally for easy organization and distribution of power or signals.

    A clamp terminal block is simply a small square block that connects wires. It has a plastic housing with holes for plugging in the wires and either comes with a small screw or a small button or square hole next to it. Its core task is to help you connect wires together safely and securely, whether it's connecting two wires or distributing power or signals to different places, it's very convenient and reliable.

    Don't look at it small, the production is quite elaborate. Inside the metal conductive sheet and clamping parts to precision stamping molding, but also to do the rust treatment; the key spring to ensure that the elasticity is just right; plastic shell is also a special injection molding out.

    Finally, the machine assembles them into a sturdy little unit. They can be seen working silently in the machines in factories, distribution boxes at home, and even inside various electrical appliances, and are the basic parts that make wire connections safe, neat and convenient.

Hot Tags: clamp terminal block, China clamp terminal block manufacturers, suppliers, factory