Hand-pushed forklifts realize short-distance handling of goods through manpower operations. The operator first inserts the fork smoothly into the pallet notch to ensure that the fork is fully entered and balanced left and right. Then, the hydraulic lifting handle with both hands is driven to rise through the Pascal principle. During this process, the pressure generated by the manual pump can reach 5-10 megapas, which can easily lift weights of up to 2 tons. When the fork rises to a height of 10-15 cm from the ground, the vehicle can be towed.
During the movement, the cargo needs to be kept at a low level to maintain stability. When turning, you should slow down in advance and guide the direction through the body. The operator must always be in a safe position behind the vehicle, holding the pull handle tightly with both hands. The ground slope should not exceed 7 degrees, otherwise it may cause a risk of rollover. For heavy objects exceeding 1 ton, it is recommended to have two operators working together.
When unloading, the vehicle must be accurately positioned to the target cargo position, and slowly lift the down handle to make the cargo land smoothly. Pay special attention to the fork tip that must not forcefully move the vehicle before it completely leaves the pallet, otherwise it may damage the pallet structure. Before each operation, the cylinder sealing and fork deformation should be checked. Daily maintenance should ensure that the hydraulic oil remains within the standard scale range.
This equipment is particularly suitable for working in narrow spaces with warehouse passage widths less than 2 meters, and its minimum turning radius is usually no more than 1.5 meters. The lifting stroke of a standard forklift is generally 20 cm, and some high-position models can reach 50 cm. Forks made of high-strength alloy steel have a safety factor of no less than 3:1, ensuring that they do not deform for long-term use.
JOYEAR has been professional for fork making for 20 years and strictly follows German standards. Welcome to purchase JOYEAR forks! We use 460 MPa high-strength steel, each fork has undergone 2 million fatigue tests, and the load-bearing accuracy error is controlled within ±1 mm, providing a reliable guarantee for your logistics equipment with a lifetime warranty.









