1. Rated lifting capacity: The rated lifting capacity of the forklift refers to the maximum weight of the cargo allowed to be lifted when the distance from the center of gravity of the goods to the front wall of the fork is not greater than the distance of the load center, expressed in T (tons). When the center of gravity of the goods on the fork exceeds the specified load center distance, the lifting capacity should be reduced accordingly due to the limitation of the longitudinal stability of the forklift.
2. Load center distance: The load center distance refers to the horizontal distance T from its center of gravity to the front wall of the vertical section of the fork when placing standard goods on the fork, expressed in mm (mm). For 1T to 4T forklifts, the specified load center distance is 500mm.
3. Maximum lifting height: The maximum lifting height refers to the vertical distance between the upper surface of the horizontal section of the fork and the horizontal ground where the forklift is located when the forklift is fully loaded and the goods rise to the highest position on a flat and solid ground.
4. Gantry inclination: The gantry inclination refers to the maximum inclination angle of the unloaded forklift on a flat and solid ground, and the mast is forward or backward relative to its vertical position. The role of the forward tilt angle is to facilitate forking and unloading of goods; The function of the caster angle is to prevent the goods from slipping off the forks when the forklift is carrying the goods. Generally, the forward tilt angle of forklift is 3°~6°, and the backwardcaster angle is 10°~12°.
5. Maximum lifting speed: The maximum lifting speed of forklift usually refers to the maximum speed of cargo lifting when the forklift is fully loaded, which is expressed in m/min (m/min). Increasing the maximum lifting speed can improve the operation efficiency, but the lifting speed is too fast, and it is easy to cause cargo damage and machine damage accidents. The maximum lifting speed of domestic forklifts has been increased to 20m/min.





