120x35x800 ITA/FEM/ISO Forks

120x35 ITA/FEM/ISO Forks is the core component in the industrial material handling field, and its name directly defines the cross-sectional dimensions of forks as 120 mm wide and 35 mm thick. The dimensional tolerance control of this specification is extremely strict, and the manufacturing deviations of width and thickness are basically maintained within plus or minus 1 mm, ensuring high-precision matching and safe coordination with various forklift equipment and pallets.

This model fork is made of 42CrMo high-strength alloy steel and significantly improves its wear resistance through the fork tip high-frequency quenching process. The entire manufacturing process strictly follows ITA, FEM and ISO standards. From raw material selection to heat treatment process, each link is committed to providing excellent bending strength and fatigue resistance, ensuring its reliability and long life in high-strength repeatable operating environments.

High Safety Factor

• According to FEM standards, the forks offer high safety, with a safety factor of 3:1 or higher.

 

Hardened forks

• The fork tips receive a hardening treatment. This process hardens the surface and improves wear resistance, effectively reducing damage and deformation in the insert tray.

Excellent Fatigue Resistance

• Thanks to high-quality materials and advanced manufacturing, the forks can withstand long-term, high-frequency, repetitive loads. They resist metal fatigue and last longer.

 

Optimized Surface Treatment

• The fork surface is typically sanded or pre-treated. Workers then apply a strong color coating. This coating prevents rust and corrosion and also serves as a safety warning.

Combination

 

Some matching products of JOYEAR

Fork rack connection hook

In busy warehouses, forklift drivers need to frequently change their forks every day to handle different tasks. High-strength stamping hooks allow them to quickly and safely install 120x35 forks to their forklifts in minutes.

 

These hooks accurately snap the entry rack slide rails, ensuring the connection reliability when increasing the weight of several tons, greatly improving equipment utilization and operating efficiency.

Side shifter gasket and guide rail

In the narrow shelf passage, the forklift driver noticed that the pallet position was slightly offset. He doesn't need to adjust the position of the vehicle repeatedly, he just needs to operate the side shifter button.

 

The stamping gaskets and guides inside allow the entire set of fork racks to move horizontally several centimeters smoothly, easily aligned with the pallet holes, and inserted accurately at one time, saving a lot of time and energy and avoiding the risk of collision.

Protective end cover

On construction sites, forklifts often need to insert forks into rough stone or sand piles. Stamped metal end caps protect the expensive fork tips and withstand most of the wear and tear.

 

When the end cap is overwear, it can be replaced separately at a low cost without replacing the entire fork, significantly reducing the long-term maintenance cost of the equipment.

Sensor Trigger Tab

In highly automated warehouses, the lifting height of the forklift needs to be linked to the shelf level. A small stamping baffle rises with the fork rack.

 

When it passes through the sensing area of ​​the height sensor, it triggers a signal and lights up, prompting the driver to reach the preset unloading height.

 

This precision small part is a low-cost and efficient solution for intelligent handling and preventing shelf collisions.

Conclusion

JOYEAR is a trusted hardware manufacturer with twenty years of industry experience. We have built a strong reputation and technical expertise through consistent, high-quality production. Our team offers tailored solutions to match your unique requirements. We work closely with you to bring custom designs to life, however unique they may be. We also recommend and integrate related products based on your applications to maximize purchasing value and operational efficiency.

We cordially invite prospective partners to tour our state-of-the-art manufacturing facility in China. The best way to establish mutual trust is to observe our production process, sophisticated machinery, and stringent quality control system. Joyear looks forward to your visit so that we can show you the allure and power of professional manufacturing and talk about potential collaboration!

Hot Tags: 120x35x800 ITA/FEM/ISO Forks, China 120x35x800 ITA/FEM/ISO Forks manufacturers, suppliers, factory, ITA Class IV Forklift Forks, Forklift Forks, Pallet Fork Tines, Clamp on Universal Pallet Forks, ITA Forklift Forks, Forklift Replacement Fork