Square Metal Threaded Inserts
video

Square Metal Threaded Inserts

Minimum Order Quantity : 1000 pcs
Weight Range : 0.5g–500kg
Dimensional tolerance : ±0.1 mm
Please provide product specifications so that we can offer specific pricing and MOQ.
Send Inquiry
Product Introduction

Square metal threaded inserts perform well in radial compressive strength. For example, when M5 carbon steel inserts are radially compressed to a deformation of only 0.1 mm, the required pressure can reach 2500 N. This ensures that the insert will not undergo elliptical deformation during press-in installation. In addition, the chamfer design of the mounting hole has a significant impact on the life of the insert. The recommended chamfer size is 0.3 mm × 45°. Actual measurements can reduce the peak stress concentration during installation by about 25%, thus reducing the risk of cracking of the base material from 1.2% to 0.4%. These two data are directly related to the yield rate of automated assembly and the long-term retention of inserts.

 

The insert's impact resistance is also excellent in low temperature environments. A simply supported beam impact test was performed in accordance with the ISO 179 standard. After the M4 insert was embedded in the PC/ABS base material, it was impacted from a height of 1 m with a 1 kg drop weight at -40°C. The insert had no visible cracks or falling off, and the impact absorption energy reached 9.8 J. In addition, for applications that require anti-loosening, microcapsule anti-loosening glue can be pre-coated on the threads of the insert. After coating, the loosening torque of the M5 thread is increased from 1.0 N·m when uncoated to 3.0 N·m, which can meet the requirements of anti-vibration connection of automobile parts.

 

 

 

Parameters

 

JOYEAR is a family-owned business that provides high-volume, highly efficient export solutions for industrial components to customers worldwide. Our custom metal products are expertly crafted. Send us your design files, whether they are digital drafts or prototypes, and our knowledgeable staff will precisely create tangible parts that satisfy your requirements.

 

Metal Type Tensile Strength (MPa) Surface Hardness Corrosion Resistance
Carbon Steel 400~550 ⭐⭐⭐ ⭐
Stainless Steel 500~700 ⭐⭐⭐ ⭐⭐⭐⭐⭐
Brass 300~450 ⭐⭐ ⭐⭐⭐⭐
Aluminum Alloy 200~350 ⭐ ⭐⭐⭐

 

★ Our product range includes:

►Materials: Carbon steel / Mild steel / Structural steel / Stainless steel / Aluminum / Copper, etc.

►Forms: Sheets / Profiles / Tubes / Round bars / Flat bars / Square bars, etc.

 

Drawing Design & Confirm

 

Obtain drawings from clients or produce drawings based on their samples or specifications.

The drawings, product raw materials, surface treatment, and other details are attested to by both parties.

 

product-984-760

 

Advantages

product-800-500

► Anti-rotation square structure


Square cross-sections naturally resist rotation better than round inserts. The four fillet radii are controlled to be less than or equal to 0.2 mm, and the maximum static rotation torque it can handle after the mounting holes are fitted is about 40% higher than that of circular inserts of the same size. This keeps the insert from rotating around the outside when the screws are tightened again and again. It is especially useful for parts that need to be fixed often.

► Extensive specification coverage


You can get square metal thread inserts in all sizes, from M2 to M12. For instance, M3's minimum outer side length and height are both only 4.0 mm. It works well for threaded connections on plastic shells with very thin walls (1.5 mm). The M12 specification is used for heavy equipment and has an outer side length of up to 14 mm. The range of specifications meets the needs of most industrial designs, and the selection is flexible.

product-800-500
product-800-500

► Controllable installation pressure requirements


The pressure needed for hot melt installation is moderate and works well with automated equipment. For M5 inserts, the recommended installation pressure is 500 to 800 N, and the pressing speed should be kept between 5 and 10 mm/s. With this setting, the insert can easily fit into the plastic hole that has been heated to 200°C without making the base material bulge or the insert tilt. Pneumatic or servo presses can easily reach this pressure range, which is good for high-volume precision assembly.

► Uniform galvanized layer thickness


The carbon steel insert is made using the barrel plating process. The galvanized layer is always 5–8 μm thick (average 6.5 μm), and the local minimum thickness is ≥4 μm. After testing with neutral salt spray, it takes at least 72 hours for red rust to show up. The high-quality coating can make the corrosion resistance life last twice as long as cheap inserts that are only 3 to 5 μm thick (the salt spray time is only 24 hours). This is especially good for products that will be sent to coastal areas with high humidity.

product-800-500

 

why choose us

product-800-500

►Allows substrates to be thinner walled


For square inserts, the minimum wall thickness is only 20% of the insert's outer length. The M3 insert, for instance, has an outer edge length of 4.5mm and can be put on a plastic plate that is only 0.9mm thick without breaking. This lets the walls of the product be 0.5mm thinner, which makes the whole machine about 8% lighter.

 

►Avoid dust pollution


When you tap, you will get plastic debris, and every thousand M4 threaded holes will make about 0.5g of dust, which could get on electronic contacts. The square insert fits together without cutting, and it can be cleaned to ISO Class 7, which makes it good for medical and precision electronic assembly.

►Improve electrical safety


Galvanizing the carbon steel insert makes the contact resistance stable at ≤0.5 mΩ (measured 0.3 mΩ). Plastic threads that are tapped directly are not conductive and need an extra ground nut. Using conductive inserts can cut down on one part and save 8 seconds of assembly time per unit.

 

►Improve appearance quality


After installation, the insert is level with the base material, with a height difference of less than 0.05 mm. There is no need for secondary milling. Some rivet nut columns will stick out 0.2 to 0.5 mm, which will change how it looks. The flush design makes the product look better, making it perfect for high-end consumer electronics and car interiors.

product-800-500

 

Price & Order

 

Provide a quote, ensure that the order quantity is accurate,

and include all relevant details, such as the terms of payment, the terms of trade, the type of packaging, etc.

 

3001

 

Production & Shipping

 

Follow the original drawings and samples exactly when producing the goods.

It was carefully packaged and delivered to the clients following a final inspection.

 

6001

7001

8001

 

 

 

 

 

 

 

Hot Tags: square metal threaded inserts, China square metal threaded inserts manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry